Fukuda FRE-203XG GREEN Beam Rotary Laser Level CUSTOMISE Your Laser Level Kit

Fukuda FRE-203XG Laser Level Kit (Very Bright GREEN Beam, Horizontal, Vertical, 90° Squaring, Scan & Dual Grade). Using the Kit Choice menu you can customise your Laser Level kit to meet your requirements and budget. The various kit choices allow you select whether you want to upgrade the kit to have a Detector / Receiver with the mm/inch display and if you want a Tripod/Staff. There are 4 kit choices covering the various permutations. You can see the individual kit choice descriptions below. The Fukuda FRE-203XG is an accurate, very bright GREEN beam laser level which is well featured & competitively priced. It replaces the extremely reliable Fukuda FRE-301G, to which it shares many of its internal components. It builds upon this foundation to incorporate many new features and improvements. This is currently the only model in the Fukuda range which is extremely robust, having a drop-test specification of 1 metre onto concrete. The top glass “lighthouse” is protected by a metal die-cast cover whilst a robust roll cage adds increased durability. The FRE-203XG quickly auto levels to set horizontals, verticals and 90-degree site squaring. In addition, this laser can be switched to Manual mode where the spinning beam can set a grade (fall) in the X-axis, Y-axis or both together (dual grade). You can only grade match with this system and not key in a value, however, it will set up to a 1:11.1 (9%) grade. You have the facility to totally stop or move the green dot slowly in either direction using the remote control. The rotational speed is adjustable in 4 increments up to max. For Indoor use, the SCAN facility comes into its own. This enables the User to stop the dot, then make it oscillate as a short intense green line in one area of the room only. Left/right keys on the remote control moves this laser line to the exact area of working. A really useful feature. You can keep XX axis auto level, whilst setting a Grade (tilt angle) on the YY axis. This is helpful for setting falls of drainage, car-parks & access ways. Or you can set grades in both axis together ie. Additionally, a perfectly plumb laser dot is generated above & below the instrument via the prism system. With the instrument set on its side to spin vertically, these dots can be used to set 90 degree right angles for groundworks site Squaring etc. Horizontal accuracy: +/- 2.8mm over 30 metres (+/-20 arc seconds) Vertical accuracy: +/- 2.8mm over 30 metres (+/20 arc seconds) Auto (self) levelling range: +/-5 degree (instrument will auto level on a surface within 5 degrees of true level) Measuring range: 500 metres diameter (using the supplied laser detector) Drop specification test: 1m onto concrete Rotation speed: 0, 60, 300 & 600rpm Dual Grade range in both X & Y axis: +/-9% (1 in 11.1) Laser Output: 532nm class IIIA visible green laser diode Laser plumbing: Accuracy +/-1mm / 1.5m Remote Control range: 20m by infrared. Power supply: Battery Pack containing 4 x 1.2 Volt rechargeable “C” type batteries & an alkaline battery spare pack Continuous operating: 50hrs approx. Working Temperature: -20 to +50 deg C Waterproof protection: IP66 Instrument Dimensions: 215(L) x 215(W) x 210H (mm) Instrument weight: 2.5kg (with batteries) Robust & foam lined, carry case: 460 x 360 x 255(H) mm. Operating diameter 500m (250m either side of the instrument). Fukuda FRE-203XG Kit with standard Detector, Tripod & Staff. Fukuda FRE-203XG Rotary Laser Level (checked and pre-calibrated). Fukuda FRD600G Laser Detector with staff mounting bracket & batteries. Fukuda RC301 Remote Control. Spare Alkaline Battery Pack. UK Mains Battery Charger. Green Magnetic Target Plate. 4m Measuring Staff, type TLS4S. Foam Lined Carry Case. Fukuda FRE-203XG Kit with standard Detector – NO Tripod & Staff. Fukuda FRE-203XG Kit with upgraded FRD800G (mm/inch) Detector, Tripod & Staff. Fukuda FRD800G Laser Detector with Digital Readout (mm / inch) with staff mounting bracket & batteries. Fukuda FRE-203XG Kit with upgraded FRD800G (mm/inch) Detector. NO Tripod & Staff. In some kit choices. 4m Telescopic Levelling Staff (Model: TLS4S). 4m, 5-section, Telescopic Levelling Staff. Five robust aluminium sections with abrasion proof scale. Closed length height 970mm, extending to maximum height of 4m. Automatic locking buttons when extended. Millimetre scale on back and E-graduations (1cm) markings on front. Rear mm scale (for use with laser levels) has ZERO mm marking at ground level. Red / Black coded front sections. Accepts all Laser detector mounting brackets. Removable, rear-mounted circular Bubble Level. Height: 0.97m closed length to extended max 4m. Surveying Tripod (Model: S-LAT). Maximum 1.5m height. Extending legs with quick-release, toggle clamp adjustment. Flat top, mounting head. 5/8 inch x 11 thread. Closed length 0.925m. Opened height 1.5m approx. Fukuda FRD600G Standard Laser Detector Features. Large 125mm reception window picks up the beam quickly and makes it easy to stay in range. Two LCD screens both front & back. Simultaneous elevation LED’s signal in low light levels and over longer distances for easier reading in poor light conditions. A back-light is included. Multiple deadband sensitivity settings, three in all, allows adaptation to meet all your job site requirements. Dust and weatherproof housing to IP55. Very powerful, top & side mounted magnets. Continuous usage, 30 hours battery life with auto switch off facility. Detecting Sensitivity: fine, medium & course settings +/- 1mm, +/-2.5mm & +/- 5mm. Display: Front & back LCD, back-lit (blue tint). (selectable On, loud/normal & Off). Power supply: 1 x 9V, PP3 alkaline battery. Operating time: Approx 30 hours continuous, at 20 deg C. Low battery warning via LCD. Power Conservation: 15 minutes auto cut-off. Working temperature: -20 to +50 deg C. Dimensions: 75 x 38 x 165mm. Weight: 590g (with battery & bracket). Fukuda FRD800G Laser Detector with Digital Readout (mm / inch). Upgrade the kit to include the Fukuda FRD800G Detector – The perfect choice for the Fukuda FRE-203XG! Fukuda Lasers have developed a “top of the range” detector for the Professional Tradesperson which is easy-to-use and accurate. It is ideal for use with any brand of rotating green beam laser level. The FRD800G Laser Detector is a highly versatile, well-featured laser receiver for both basic and advanced levelling and aligning applications; designed for general, concrete and site preparation contractors. It features a digital readout of elevation that provides a numeric display of +/-45mm to 1mm resolution. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. The readout is displayed on the large front and rear LCD’s, showing exactly how far the elevation is from on-grade. A back-light assists readings in low ambient lighting. Selectable units of measurement can be displayed to meet your specific application: in mm, cm or inches. A 125mm long green pick-up window, more than double the industry standard, allows quick acquisition of the laser beam. Readings are shown in three ways: via back and front LCD, coloured LED indication and by audible sound, selectable loud/normal/off. This detector is designed to survive tough construction site conditions, being water and dustproof to IP55. It can be used as either a hand-held or staff mounted detector for a wide range of construction applications. Digital readout of elevation to +/-45mm, so not only will high or low arrows be displayed, but the exact distance from grade will also be numerically displayed. This eliminates the need to get exactly “on-grade” to make measurements, thus speeding up setting-out. Large 125mm reception height acquires the beam quickly and makes it easy to stay in the beam. Simultaneous elevation LED’s signal in low light levels and over a longer range for easier reading in poor light conditions. Multiple deadband sensitivity settings, three in all, allows adaptation to meet all your jobsite requirements. Continuous usage, 40 hours battery life with auto switch off facility. FRD800G Detector upgrade includes. 4 x type AA alkaline batteries. Instruction & safety manual. Please Note: If you upgrade to the FRD800G Detector, the default Detector will be removed from the kit. As standard with all kit supplied. Checked, Calibrated & Prepared. Prior to dispatch, your new Laser Level Kit will be inspected and prepared by our technicians. During this time the kit will be checked and calibrated and all batteries fitted. We will also apply our “supplied by” labels to permit access to our Service Department in the future. Any accessories which require radio pairing (where applicable) will also be setup. Sometimes you just need a little help. What does this button do? “, “How do I set this? Freephone: 08000 869 769. Exclusive access to our Repairs & Servicing Department. If your laser is damaged, needs calibrating or requires some other work doing to it, we have expert technical staff available to assist you. Focusing only on our customers, means we have quick turn around times – getting you back up and running faster!