12 Lines Rotary Laser Lazer Level Cross Line 360° Self Leveling 3D Measure Tool

503CG 3 x 360 Green Laser Level Specifications. Laser Class: Class 2 (IEC/EN60825-1/2014). Horizontal/Vertical Accuracy: ±2mm at 10m. Working Distance (Line): 65Ft(100 LUX)/20m(100 LUX), 196Ft/60m with Huepar Laser Receiver LR-6RG&LR-5RG. Operating Time: 6 hours continual use with all laser beams on. Power Source: 7.4V 2600mA Li-ion battery. Operation Temperature Range: 14? 104? (-10? 40?). Storage Temperature Range: -4? 158? (-20? 70?). Mount Size: 1/4″-20 and 5/8″-11. Items in the Package. 1 x Huepar 503CG 360° Laser Level. 2 x Rechargeable Lithium Batteries. 1 x Battery Charger. 1 x 360° Magnetic Bracket. 1 x Type-C Power Cord&1 x Power Adapter. 1 x Pouch Bag for Laser Level. 1 x Portable Tool Bag. 1 x Laser Target Plate&1 x User Manual. Self-leveling Mode & Manual Mode. When the laser tool is switched to the unlocked position, the self-leveling mode is enabled. The laser beam will flash when the tool is beyond self-leveling range 4° ± 1°. Manual / Tilt Mode. When the pendulum locked, the laser tool can be placed for alignment at any angle. The laser beam will blink every 3-5 seconds to remind you that it’s not self-leveling now. This laser tool utilizes the large capacity li-ion battery which is compatible with Samsung SB-L110 battery. An extra battery is included in the package for backup. The level tool can be used at job site by plugged in directly when take out the battery. Users can charge the battery independently with the battery charger. The battery is not being charged in the device when connected to the power adapter. Durable Design & Easy to Use. Metal Top Design: Over-molded metal laser window withstands hazardous job site conditions and can be removed and replaced with a screwdriver. The kit comes with a small pouch bag for the laser level, which is dust and scratch-proof to some extent, bringing much more convenient to carry and store the laser tool. IP54 water/dust resistance ensures you work well in hazardous working conditions. Green Target Plate: Increases the visibility of the laser beam. Fully Layout with 3 x 360° Line Lasers? : One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Dual Power Methods & Type-C Charging Port? : Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging. Brighter Green Laser & Outdoor Pulse Mode? : This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 25m (300LUX) of accuracy within ±3mm at 10m. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 60m with Huepar Line Laser Detector. More Installation Methods? : The laser level comes with 1/4-20 thread to suit for standard tripod or laser mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. And the 1/4″-20 & 5/8″-11 mounting threads help mount it to different tripod threads. Two strong magnets allow for attachment to metal track and steel. Two nail holes for more fixing methods when working. The laser windows can be removed and replaced with a screwdriver. Durable Design & Package Contents? : The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. The kit comes with a hard carry case bringing much more convenient to carry and store the laser tool. Package includes Laser level, Li-ion battery with type-c charging port, Magnetic bracket, Type-C power cord, Power adapter, Target plate, User manual. 3 x 360° Multiple Line Switching Functions. This laser level allows users to line up level, align, square and plumb by generating three 360° laser planes – one horizontal and two vertical lines. The horizontal line and vertical lines can be selected individually by separate H and V button on the keypad. In manual mode, when all laser lines are switched OFF, the laser tool will automatically turn off after about 4 minutes of inactivity. Turn ON the pulse mode: After power ON, short press the pulse mode button to switch ON/OFF the pulse mode. Pulse mode extends the working range up to 200Ft. In brighter working conditions when using with Huepar Line Laser Detector (ASIN: B07L6FP48S). When the pulse mode is activated, the laser beams will become dimmer. It is compatible with Huepar LR-6RG / LR-5RG Line Laser Detector only. Keep the pulse mode on when using with a receiver. 360° Strong Magnetic Pivoting Bracket. Allows for attachment to metal surfaces and enables to turn the laser level around at 360 degree. The bracket offers ability to mount to any object up to 0.47 thick. The fine-tuning knob with lock on the bracket help adjust and lock the height within 3.74. 1/4″-20 and 5/8″-11 female thread on the laser tool as well as the 5/8-11 mounting thread on the bracket to suit for standard tripod or laser mounting pole. The portable tool bag features a pop-open design and convenient interior compartments to allow for easy access to tool and parts. Two interior flap covered pockets with loop closure bring much more convenience. The tool bag comes with the extra padded handle and adjustable shoulder strap that adds extra comfort when carrying the tool and allow for safe and secure transit.